Favorites

Sabic 218WJ LLDPE Film

Trading Port：Xingang, Qingdao, Shanghai, Ningbo Lead Time：30

Reference FOB Price / Purchase Qty

US$ 1050

/ Tons

1 Tons (Min.Order)

Payment Terms:

L/C,T/T

Stock 1104.00

Quantity

Tons

Get Lowest Price

Buy Now

Add to Cart

Samples:

US$ 1.00 /1kg(Min.Order) Request Sample

Contact Supplier

zhangping

tdd-global@toodudu.com

Supplier Information

YYDD (Qingdao) Technology Co., Ltd.

Retailer

Titanium dioxide, pigments, fillers, alcohols

Basic Info.

Description

218WJ is a butene Linear Low Density Polyethylene TNPP free grade suitable for general purpose packaging. It is easy to process giving good tensile properties, impact strength and optical properties. 218WJ contains slip and antiblock additives.

Properties

Lamination film, thin liners, shopping bags, carrier bags, garbage bags, coextruded films, consumer packaging and other generalpurpose applications.

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHOD
POLYMER PROPERTIES
Melt Flow Rate
at 190°C and 2.16 kg	2	g/10 min	ASTM D1238
Density	918	kg/m³	ASTM D1505
FORMULATION
Slip agent	√	-	SABIC method
Anti block agent	√	-	SABIC method
OPTICAL PROPERTIES
Haze	13	%	ASTM D1003
Gloss
at 60°	80	-	ASTM D2457
FILM PROPERTIES
Tensile Properties
stress at break, MD	35	MPa	ASTM D882
stress at break, TD	29	MPa	ASTM D882
strain at break, MD	700	%	ASTM D882
strain at break, TD	750	%	ASTM D882
stress at yield, MD	12	MPa	ASTM D882
stress at yield, TD	10	MPa	ASTM D882
1% secant modulus, MD	220	MPa	ASTM D882
1% secant modulus, TD	260	MPa	ASTM D882
Puncture resistance	63	J/m	SABIC method
Dart Impact Strength	85	g	ASTM D1709
Elmendorf Tear Strength
MD	130	g	ASTM D1922
TD	320	g	ASTM D1922
THERMAL PROPERTIES
Vicat Softening Point	98	°C	ASTM D1525

(1) Mechanical properties have been measured byproducing 30 μ film with 2.5 BURusing 100%218NJ.

Processing Conditions

Typical processing conditions for 218WJ are: Melt temperature: 185 - 205°C, Blow up ratio: 2.0 - 3.0。

Health, Safety And Food Contact Regulations

218WJ resin is suitable for Food contact application. Detailed information is provided in relevant Material Safety Datasheet and for additional specific information please contact SABIC local representative for certificate. DISCLAIMER: This product is not intended for and must not be used in any pharmaceutical/medical applications.

Storage And Handling

Polyethylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.