Sabic M500026T LLDPE Injection
Trading Port：Huangpu / Ningbo / Shanghai / Qingdao
Lead Time：30
Payment Terms:
L/C,T/T
Stock
7000.00
Quantity
kg
Samples:
Contact Supplier
TDD-global
info@toodudu.com
Supplier Information
Titanium dioxide, pigments, fillers, alcohols
Basic Info.
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
| POLYMER PROPERTIES | |||
| Density | 926 | kg/m³ | ASTM D1505 |
| Melt Flow Rate (MFR) | |||
| at 190℃ and 2.16 kg | 50 | g/10 min | ASTM D1238 |
| MECHANICAL PROPERTIES | |||
| Flexural Strength | 9 | MPa | ASTM D790 |
| Flexural Modulus (1% Secant) | 200 | MPa | ASTM D790 A |
| Izod Impact Strength | 500 | J/m | ASTM D256 |
| Hardness (Shore D) | 50 | - | ASTM D2240 |
| ESCR (10% Igepal), F50 | 3 | Hrs | ASTM D1693B |
| ESCR (100% Igepal), F50 | 6 | Hrs | ASTM D1693B |
| Tensile stress at yield (50mm/min) | 10 | MPa | ISO 527-2 1A |
| Tensile stress at break (5mm/min) | 12 | MPa | ISO 527-2 1A |
| Tensile strain at break (5mm/min) | >100 | % | ISO 527-2 1A |
| THERMAL PROPERTIES | |||
| Vicat Softening Point | 88 | ℃ | ASTM D1525 |
| Brittleness Temperature | <-75 | ℃ | ASTM D746 |
Polyethylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.
Send Inquiry
You Might Also Like
-
Sinopec R546U LLDPE RotomoldingUS$ 500.00/kg
-
ExxonMobil 1018 seriesm LLDPE FilmUS$ 500.00/kg
-
Sabic R50035E LLDPE RotomoldingUS$ 500.00/kg
-
Sabic 118wJ LLDPE FilmUS$ 500.00/kg
-
Sabic 920NT LLDPE FilmUS$ 500.00/kg
-
Sabic M500026T LLDPE InjectionUS$ 500.00/kg
-
Sabic 222WT LLDPE FilmUS$ 500.00/kg
-
Sabic 218WJ LLDPE FilmUS$ 1050.00/Tons
-
Sabic M200024T LLDPE InjectionUS$ 500.00/kg
