EdisonWhittier - TDD-Global

Q via blow molding companies minnesota via

EdisonWhittier Release Time: June 21, 2024, 12:51 PM

Gujarat Alkalies & Chemicals Ltd, one of the largest producers of caustic soda in India, has reported a sharp decline in its first quarter profits and revenues due to slump caused by Covid-19 pandemic. Company’s net profit declined by 79.97% YoY and stood at Rs 31.81 crore in the quarter ended June 2020 as against Rs 158.80 crore during the same period last year. Sales also declined 37.27% to Rs 469.61 crore in the quarter ended June 2020 versus Rs 748.57 crore last year. Further the company has considered the revision in project cost of GNAL from Rs 2000 crore to Rs 2300 crore comprising of GST (not considered in the project cost) and IDC and pre-operative expenses due to delay in project caused by COVID-19 pandemic situation. The said additional project cost of around Rs 300 crore would be funded by the lenders and promoters (GACL and NALCO) in the debt-equity ratio of 70:30. The project being implemented by GACL- NALCO Alkalies & Chemicals (G...

0

Q hdpe material

BobYoung

EdisonWhittier Release Time: June 19, 2024, 1:24 PM

High-Density Polyethylene (HDPE) is a type of thermoplastic polymer derived from petroleum, known for its high strength-to-density ratio. It’s widely used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber. HDPE’s properties include resistance to many solvents, making it very versatile in applications ranging from food storage to protection of electronic parts. Additionally, its impact resistance and toughness make it suitable for heavy-duty containers. Its recycling code is #2, indicating its ease of recycling and environmental friendliness, aligning it well with eco-conscious consumer trends. Despite being petrochemical-based, the advancement in recycling technologies demonstrates HDPE’s potential within a circular economy, suggesting its staying power in the market.

0

Q how zonular fibers work

AndyObadiah

EdisonWhittier Release Time: June 19, 2024, 10:00 AM

The impact factor of fibers, defined within the context of academic journals, reflects the average number of citations to articles published within a specific period. This measurement serves as an indicator of the journal’s influence and standing within the field of materials science and engineering, specifically focusing on fiber technology and applications. A higher impact factor suggests a significant contribution to the knowledge base, influencing research directions and technological advancements. For industries reliant on fiber technologies, such as textiles, composites, and telecommunications, journals with high impact factors are often go-to sources for cutting-edge research and developments. However, it’s important to note that while the impact factor can guide the perceived prestige of a journal, it shouldn’t be the sole criterion for judging the quality of research work or the journal itself due to potential biases and manipulation tactics (e.g., excessive ...

0

Q functions of fiber

MyrnaBethune

EdisonWhittier Release Time: May 31, 2024, 2:33 PM

Great sources of fiber include fruits such as raspberries, apples, and bananas; vegetables like broccoli, carrots, and Brussels sprouts; legumes including lentils, black beans, and chickpeas; whole grains such as oats, quinoa, and whole wheat pasta; and nuts & seeds including almonds, flaxseeds, and chia seeds. Incorporating these foods into your diet can significantly improve digestive health, lower cholesterol levels, and help with weight control by promoting a feeling of fullness. It’s recommended to increase fiber intake gradually and ensure adequate water consumption to aid in digestion and prevent discomfort.

0

Q polypropylene everyday uses

EthelChristy

EdisonWhittier Release Time: May 12, 2024, 12:18 PM

Polypropylene (PP) is a versatile plastic widely used in various everyday items due to its resilience, cost-effectiveness, and resistance to chemicals, water, and wear. Common uses include packaging for food and consumer goods, as it is safe for contact with food and can be easily molded into bottles, containers, and wrappers. Additionally, PP is found in the automotive industry for making parts that require a light yet robust material. In textiles, polypropylene is used in manufacturing carpets, rugs, and reusable shopping bags, thanks to its resistance to staining and its lightweight property. Medical supplies, such as syringes and vials, also rely on PP for its sterility and safety. Due to its durability and recyclability, polypropylene plays a crucial role in reducing environmental impact by supporting the production of reusable products.

0

Q maximum burial depth for hdpe pipe

SabrinaBach

EdisonWhittier Release Time: May 7, 2024, 2:05 PM

The maximum burial depth for HDPE (High-Density Polyethylene) pipe significantly depends on the pipe’s diameter, wall thickness, and the type of soil it’s buried in, as well as the surface load conditions. Generally, HDPE pipes can be safely buried at depths exceeding 30 feet (about 9 meters) under specific conditions. It is crucial to follow the manufacturer’s recommendations and consider factors such as soil type, compaction, and pipe stiffness. The design must account for load and soil pressure to prevent pipe deformation. Consulting with engineers for a specific project is advisable to ensure the installation meets all structural and operational requirements.

0

Q how to install polypropylene rock drain tile

LenaLily

EdisonWhittier Release Time: May 7, 2024, 12:04 PM

Installing polypropylene rock drain tile involves several steps to ensure proper drainage and longevity. Firstly, plan the layout considering the slope for effective water drainage. Excavate a trench about 6-8 inches wide and at least 12 inches deep, ensuring a consistent slope towards the discharge point. Lay down a layer of landscape fabric in the trench to prevent soil intrusion while allowing water to pass through. Place the polypropylene rock drain tile atop this fabric. It’s crucial to ensure that the tile is properly connected and that any fittings are securely attached. Cover the tile with washed gravel or rock to enhance drainage and protect the tile. Finally, fold the excess landscape fabric over the top before backfilling the trench with soil. This method ensures that water is efficiently drained away from problem areas, protecting property from water damage.

0

Q how to keep your yarn from tangling

BeverlyJohnson

EdisonWhittier Release Time: May 5, 2024, 11:27 AM

To make yarn pom poms, start by choosing a soft, bulky yarn for a full and fluffy pom pom. You’ll need a piece of cardboard, which you will cut into a donut shape, or a pom pom maker, available at craft stores, for easier handling. Wrap the yarn evenly around the cardboard or pom pom maker hundreds of times, depending on the desired thickness. The more yarn you wrap, the denser the pom pom will be. Carefully slide scissors under the yarn wrapped around the cardboard or open the pom pom maker, and cut all the way around the edge. Tie a piece of yarn tightly around the center of the loops you’ve just cut, securing all strands. Remove the cardboard or pom pom maker, then fluff and trim the pom pom into a neat sphere. Experimenting with different yarn textures and colors can add a unique touch to your projects. It’s a simple, enjoyable craft that can add a playful element to hats, scarves, and home decor.

0

Q polyester filament yarn types

ElmerTitus

EdisonWhittier Release Time: April 29, 2024, 11:08 AM

Yes, polyester yarn can pill, though it’s generally considered more resistant to pilling compared to natural fibers like wool or cotton. Pilling occurs due to friction, causing fibers to break and form small balls on the fabric surface. The propensity for polyester yarn to pill largely depends on the yarn’s quality and how it’s woven or knitted. Fabrics with looser twists or those that are brushed for softness are more prone to pilling. Using a fabric softener or dryer sheets can sometimes reduce static and friction, potentially minimizing pilling. Additionally, garments made of polyester blends might have different pilling behaviors depending on the characteristics of the combined fibers.

0

Q what is coolmax polyester

JaniceHuggins

EdisonWhittier Release Time: April 28, 2024, 4:05 AM

Polyester and Nylon are both synthetic fibers, but they have distinct differences. Polyester is derived from coal, air, water, and petroleum and is known for its durability and resistance to shrinking and stretching. It is often used in clothing, bedding, and ropes. Nylon, invented as a silk substitute, is made from petroleum and is renowned for its strength and elasticity, making it ideal for stockings, dental floss, and fishing lines. Nylon is also more moisture-wicking than polyester, which makes it better for athletic wear. However, polyester tends to be more fade-resistant and holds dye well, making it more suitable for outdoor clothing. In terms of environmental impact, both fibers are not biodegradable, but recycling methods are improving for both materials.

0

Titanium Industry Chain

Paints & Inks Industry Chain

Resin Industry Chain

Powders Industry Chain

Coal Chemicals Industry Chain

Solvent Industry Chain

Sands & Minerals Industry Chain

Medical Industry Chain

Others