ChloeMeredith
Industry info Wiki Q&A
Q hdpe and ldpe structure
ChloeMeredith
CaraFrances Release Time: May 29, 2024, 2:53 PM
HDPE backing rings, used to provide support and ensure a tight seal in flanged joint systems, particularly in HDPE piping, vary in dimensions according to the size of the pipe and the pressure rating it must support. The dimensions include the outside diameter (OD), inside diameter (ID), bolt circle diameter (BCD), and thickness. For example, a common size for a low-pressure system might be for a 4-inch HDPE pipe, where the OD can be around 220 mm, with a BCD of 180 mm, and a thickness of approximately 18-20 mm. However, these dimensions can significantly differ based on standards (e.g., ANSI, DIN, BS) and the specific requirements of the piping system, such as the operating pressure and the environment in which it is installed. It’s always best to consult the manufacturer’s specifications or a professional engineer to choose the correct backing ring dimensions.
0
Q how to estimate the cost of plastic injection molding
ChloeMeredith
BerthaPeacock Release Time: May 25, 2024, 4:18 PM
To find the Plastic Pressure per Square Inch (PPSI) of an injection molding machine, you first need to understand that PPSI is critical in determining the pressure applied by the machine to inject plastic into a mold. This measure helps in ensuring the quality and integrity of the molded part. You can calculate PPSI by using the machine’s injection pressure (usually found in the machine manual or control panel) and dividing it by the total cavity surface area in the mold (length x width for each cavity). Remember, the machine’s pressure is typically provided in pounds per square inch (PSI), so ensure your measurements are consistent. If you’re unsure about the calculations or the machine’s settings, consulting the machine’s operating manual or reaching out to the manufacturer for guidance would be advisable. Keeping an accurate measure of PPSI is essential for achieving optimal molding conditions and high-quality products.
0
Q mim metal injection molding process
ChloeMeredith
MabelJoe Release Time: May 12, 2024, 9:00 AM
The minimum draft angle for injection molding typically ranges between 0.5° to 2°, depending on the depth of the part and its surface finish. This slight angle is essential to facilitate the removal of the finished piece from the mold without causing damage to the part or the mold. A larger draft angle is required for more intricate parts or those with a rough surface finish, as they tend to adhere more strongly to the mold. Considering the material being used is also crucial, as some materials may shrink or warp, requiring adjustments to the draft angle. Properly applying draft angles ensures smoother manufacturing processes, reduces production time, and prolongs the life of the molds, thereby impacting overall costs and efficiency positively.
0
You May Like
Q&A
Popular Information
Contacts Us:
Tel：WhatsApp +1 (443) 226-3000
email：service@tdd-global.com
User Agreement Privacy Policy Cookie Policy Intellectual Property Protection Policy About us
Copyright © 2021-2025北京涂多多电子商务股份有限公司All Rights Reserved