Q
are amino acids assembled into proteins
I'm a seasoned industrial engineer with a keen interest in machine learning. Here to share insights on latest industry trends.
You May Like
Determining the gate size in injection molding is vital for optimizing flow and preventing defects. The gate size is influenced by the material's viscosity, part size, and wall thickness. Generally, a larger gate is used for high-viscosity materials to reduce shear stress and improve flow. For thinner parts, smaller gates are preferred to minimize aesthetic issues. A rule of thumb is that the gate depth should be 50-60% of the part’s wall thickness, while the width can vary based on part design and material. Consulting material data sheets and using simulation software can provide specific guidance. Additionally, experience and trial runs play a crucial role in fine-tuning the gate size for optimal results.
Choosing between polyethylene and copper for LP (liquefied petroleum) piping depends on several factors including application, cost, and durability. Copper has been a long-standing choice for its durability and resistance to corrosion. It's suitable for both indoor and outdoor installations and is highly reliable over long periods. However, copper can be more expensive than polyethylene and requires soldering for installation, which may not be ideal for all situations. Polyethylene, on the other hand, is cheaper, lightweight, and easier to install, making it a suitable choice for extensive underground piping systems. It's also highly resistant to corrosion and chemical reactions. However, it's not as mechanically strong as copper and may not be suitable for exposed locations. Therefore, the better choice depends on specific project needs: copper for durability and indoor installations, and polyethylene for cost-effectiveness and extensive underground use.
Applying epoxy resin on concrete involves several essential steps to ensure a strong and durable finish. First, the concrete surface needs to be properly prepared; it should be clean, dry, and free of any debris, grease, or old coatings. Grinding or shot blasting may be necessary to ensure the surface is porous enough for the epoxy to adhere properly. Once the surface is ready, patch any cracks or chips with an appropriate filler. Then, mix the epoxy resin according to the manufacturer's instructions. This typically involves combining the resin with a hardener. Start by applying a thin primer coat with a roller or brush to help the epoxy bond to the concrete surface. Allow it to cure as directed. Next, apply the epoxy coating in thin, even layers, using a roller or squeegee. Be sure to spread it evenly and work out any bubbles that may form. Several layers may be necessary, with each layer needing to cure before the next is applied. Lastly, a sealant can be applied for extra durability and protection against stains and moisture.
You May Like
Q&A
- •which amino acid do not have beta sheets and helix
- •how to read ink blots
- •a la francaise coating
- •how to clean tools after using epoxy
- •is it safe to heat resin after it sets
Popular Information
- •Budget 2018: Non-ferrous metals sector wants govt to reduce import duty on raw materials
- •It’s critical for Nalco to set up a second smelter: CMD Anshuman Das
- •Nuberg bags EPCM contract for India’s largest, 2,200 TPD Chlor-Alkali project from Adani Group
- •The Price of Caustic Soda Declined in October as a Whole
- •Tosoh reports rise in sales, profits in first quarter