Recently, there is a topic in the community about the color change of cars. Today, I will popularize science for you about the color change film of cars.
At present, the color change film is not only used to beautify the car body, but also has the purpose of protecting car paint. generally, the better quality color change film uses imported back glue, which has a good texture, but the price is higher, generally ranging from 3000 to 10, 000. In the jargon, it is said that 3% of the materials are divided into 7 divisions of labor, and then we will talk about how to correctly choose the color film.
At present, generally speaking, the color change film mainly uses low viscosity as the paste material, and the main material is flexible plastic material, with a general thickness of about 10 to 40. If you want your color change film to have a certain protective performance of car paint, it is best to choose a brand material with high thickness and good flexibility.
With regard to the identification of back glue, at present, our mainstream consumer consciousness has seen healthy environmental protection and good texture from simply satisfying the color change, so the quality of back glue is directly related to the quality of the color change film. Good color change film opened in a large area, there is no pungent smell, if there is, please pay attention! The formaldehyde of this kind of discoloration film is seriously exceeded, and the price change film on the market comes from unknown small workshops (there are often many small factories in Guangzhou to do this kind of black heart film). The sale of this kind of color change film is lower, the purpose is to disturb the market, this kind of color change film must be carefully screened! At the same time, the modified film should have good pulling and thermal ductility, and the back needs to have diamond exhaust lines to facilitate construction. And good quality color film, after the completion of the construction will leave any imprints and orange peel patterns.
After changing the color film, there should be a clear air guide groove to facilitate the exhaust construction, and there is no unpleasant smell after the back glue is torn apart.
After choosing a brand, next, you need to determine the color you choose, and after choosing your favorite color from the color card, you can ask the merchant to simulate the effect you want through Car++ or other software.
The effect of changing color can be simulated by using CAR++ and other related APP.
After choosing the color you like, it is time for the construction. First of all, you have to make sure that your car body is smooth. If there are depressions or small potholes on the paint surface, it will be more obvious after applying the color change film, so be sure to check the car body before sending it to change color. Make sure the car is flat.
Next up is the car wash! This car wash really needs to be washed very carefully, and every corner needs to be cleaned. After cleaning, to ensure that there is no rust and oil film attached to the paint, it is best to use volcanic mud to make a SPA for the whole body of the car. This process can be left to the merchant to deal with!
In order to achieve a good film feel, as well as coating, some parts need to be disassembled, such as: door handle, rearview mirror. Basically, for now, there are still a lot of people who need to disassemble and paste it. So you must not be distressed ha!
Here comes the key point that needs to be explained next! About the craft! First of all, a master's construction is not in place in addition to the speed of construction, but also to consider the technology, the focus is on the angle and whether the master's hands are stable, but now there are a lot of portable products, such as non-trace cutting film line can well solve the knife marks produced in the construction (and all masters will leave knife marks in the color film, the main master knife strength and the grasp of the thickness of the film).
With regard to the wrapping angle of the car color change film, first of all, the interface position should feel flat, similar to our book package, there can be no warping edge and so on.
Well, the selection and construction of the color-changing film is introduced here. In fact, it is not unnecessary to maintain the color-changing film after sticking it. It can only be said that the maintenance cost can be reduced, after all, the color change film is not omnipotent, it is necessary to manually wax the color change film and clean the car body, and it can be stained with water within 3-7 days after applying the color change film, in order to prove the good adhesion of the film.
(Kodiak Community GzJun original, this article is a personal point of view, only as a reference, the pictures are from the network! )
Recommended Suppliers
-
Green&Golden Hongtu Brand HT-105 Environmental Friendly Regular Compound Printing Ink
-
Hydroxy Propyl Methyl Cellulose
-
Sabic 118wJ LLDPE Film
-
Factory directly supply good price disposable food container 3 compartment cornstarch rectangle food container
-
Food Grade Zinc Gluconate
-
Manufacturers direct selling gift packaging boxes 3 compartment cornstarch rectangle food container
-
MTM(Methyl Tin Mercaptide)Heat Stabilizer
- •when to apply wetting agent
- •how to darken epoxy
- •where to buy envirobond 403 polymer
- •who won the cover of inked magazine
- •how is white pigment made
- •India may continue with anti-dumping duty on Nylon Tyre Cord Fabrics from China, caustic soda from China, South Korea
- •Price Summary of Related Products in Domestic Plasticizer Industry Chain
- •The Price of Flake Caustic Soda Fell This Week (March 6-10)
- •Kemira scales up water treatment chemicals production in China
- •2 stock picks to invest in: Ashish Maheshwari, Blue Ocean