Although steel is usually stronger than titanium in terms of tensile strength. titanium is stronger in terms of strength-to-weight ratio. which means that it's just as strong as steel. but much lighter. making it an ideal material for industries like aerospace. It depends on what you value most: Pure strength is a combination of strength and lightness.

To clean epoxy resin, first, let any spills fully cure. For uncured resin, use paper towels to remove the bulk, then clean the surface with isopropyl alcohol (rubbing alcohol) or acetone. These solvents break down the resin, making it easier to wipe away. For tools or surfaces with cured resin, try soaking in vinegar for a few hours to soften the resin, then scrub off. Always use gloves to protect your skin and ensure good ventilation when using chemicals. For finished epoxy projects, mild soap and water should suffice for regular cleaning, maintaining the surface without damaging it.

Grinding epoxy off concrete requires specific tools and safety measures. Firstly, you’ll need an angle grinder or a floor grinder, depending on the scale of the job, equipped with a diamond grinding wheel or disk which is effective against epoxy. Start by cleaning the surface and marking any high spots or areas with dense epoxy coverage for targeted grinding. While grinding, move the tool in circular motions to avoid grooving the concrete and wear protective gear, including goggles, gloves, and a dust mask to safeguard against epoxy dust inhalation. Work in sections, gradually removing the epoxy layer and vacuuming up debris as you go to keep the area clean. After grinding, inspect the surface for any missed spots and repeat if necessary. Follow up with thorough cleaning to prepare the surface for any new finishes.