Lotrene FD3020DLDPE Film

Port：Hangpu / Ningbo / Shanghai / Qingdao Lead Time：30

Reference FOB Price / Purchase Qty

Get Best Price

US$ 500

/ Kg

1 Kg (Min.Order)

Payment Terms:

L/C,T/T

Samples:

US$ 1.00 /1Kg(Min.Order) Request Sample

Beijing TDD E-commerce Co., Ltd

Online Store

11 Yrs

CN Supplier

Verified Exporter Verified Exporter Industry Leader Industry Leader

Main Products

PVC Resin‬ , ‪PP‬ , ‪PE‬ , ‪Pet‬ , ‪Titanium Dioxide‬ , ‪Pigment‬ , ‪Car Tire‬

Description

Purell PE 3020 D is a low density polyethylene with high rigidity, good opticals and good chemical resistance. It is delivered in pellet form. The grade is used by our customers for small blow mouldings including packaging of pharmaceuticals in blow fill seal technology and injection moulding for medical devices, closures and seals.

Properties

Typical Properties	Method	Value	Unit
Physical
Density	ISO 1183	0.927	g/cm³
Melt flow rate (MFR) (190°C/2.16kg)	ISO 1133	0.30	g/10 min
Bulk density	ISO 60	>0.500	g/cm³
Mechanical
Tensile Modulus (23 °C)	ISO 527-1, -2 3	300	MPa
Tensile Stress at Yield (23 °C)	ISO 527-1, -2	13.0	MPa
Hardness
Shore hardness (Shore D)	ISO 868	51
Thermal
Vicat softening temperature (A50 (50°C/h 10N))	ISO 306	102	°C
Melting Temperature	ISO 3146	114	°C

Health and Safety:

The resin is manufactured to the highest standards but, special requirements apply to certain applications such as food end-use contact and direct medical use. For specific information on regulatory compliance contact your local representative.

Workers should be protected from the possibility of skin or eye contact with molten polymer.Safety glasses are suggested as a minimal precaution to prevent mechanical or thermal injury to the eyes.

Molten polymer may be degraded if it is exposed to air during any of the processing and off line operations. The products of degradation have an unpleasant odour. In higher concentrations they may cause irritation of the mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapours. Legislation on the control of emissions and pollution prevention must be observed. If the principles of sound manufacturing practice areadhered to and the place of work is well ventilated, no health hazards are involved in processing the resin.

The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away from contact with direct flames and/or ignition sources. In burning the resin contributes high heat and may generate a dense black smoke. Starting fires can be extinguished by water, developped fires should be extinguished by heavy foams forming an aqueous or polymeric film. For further information about safety in handling and processing please refer to the Material Safety Data Sheet.

Storage

The resin is packed in 25 kg bags or in bulk containers protecting it from contamination. If it is stored under adverse conditions, i. e. if there are large fluctuations in ambient temperature

and the atmospheric humidity is high, moisture may condense inside the packaging. Under these circumstances, it is recommended to dry the resin before use. Unfavourable storage

conditions may also intensify the resin´s slight characteristic odour. The resin is subjected to degradation by ultra-violet radiations or by high storage temperatures. Therefore the resin must be protected from direct sunlight, temperatures above 40°C and high atmospheric humidity during storage. The resin can be stored over a period of more than 6 month without significant changes in the specified properties, appropriate storage conditions provided. Higher storage temperatures reduce the storage time. The information submitted is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors of the responsibility of carrying out their own tests and experiments; neither do they imply any legally binding assurance of certain properties or of suitability for a specific purpose. The data do not relieve the customer from his obligation to control the resin upon arrival and to complain about faults. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.

Company Overview

B2B cross-border e-commerce platform and the core subsidiary of Guolian Co., Ltd. (603613. Sh). Specialized in raw material&industrial products for more than 20 years and provide wholesale products for customers worldwide. Now the main running industry chain contains: Pigment industry chain, Titanium industry chain, solvent industry chain, resin industry chain, lubricating oil industry chain, carbon black industry chain, packaging industry chain, medical industry chain etc.

Basic Information

Company Name	Beijing TDD E-commerce Co., Ltd	Country	China
Business Type	Online Store	Company Size	2000
Established	December 18, 2014
Address	Building No.3, Area 6, No.188, West of South Forth Ring Rd, Beijing, China
Main Products	PVC Resin‬ , ‪PP‬ , ‪PE‬ , ‪Pet‬ , ‪Titanium Dioxide‬ , ‪Pigment‬ , ‪Car Tire‬
International Commercial Terms(Incoterms):	FOB, CFR, CIF, FCA
Terms of Payment:	LC, T/T, D/P
Average Lead Time:	Peak Season Lead Time: one month, Off Season Lead Time: within 15 workdays
Number of Foreign Trading Staff:	20~40 People
Main Markets:	Southeast Asia, Africa, Mid East
Nearest Port:	Tianjin,Qingdao,Shanghai
Import & Export Mode:	Have Own Export License