How to repair the broken hole of PVC pipe?
Small hacksaw, PVC pipe, abrasive paper, rag, bamboo joint and glue shall be prepared. First, use a small hacksaw to cut the broken hole of the PVC pipe, use sandpaper to polish the new pipe orifice, use a rag to wipe the polished part, apply special glue to the pipe orifice, and also apply glue to the bamboo joint, connect the port with the bamboo joint, and then apply appropriate amount of glue to the joint.
The specific operation is as follows:
1.First use a small hacksaw to cut the hole of the PVC pipe.
2.Grind the new nozzle with sandpaper.
3.Wipe the polished part with a rag.
4.Apply special glue to the nozzle.
5.Glue is also applied to the bamboo joint.
6.Connect the port with the bamboo joint.
7.Apply proper amount of glue on the joint.
PVC Resin SG-3
BILLIONS Rutile Titanium Dioxide BLR-601
- Petroleum Coke Market Analysis Analysis of domestic petroleum coke index(December 23, 2024)729
- The Import and Export of Carbon Black Maintained a YOY Increase in November(December 24, 2024)1005
- Titanium Market Overview(December 24, 2024)465
- Caustic soda: The liquid caustic soda market is stable with a decline, the flake caustic soda remains relatively stable, and the market shows a "four consecutive increases"(December 24, 2024)569
- Polyethylene PE: Spot prices are stable with small fluctuations, and transactions on the market slow down(December 24, 2024)336