Favorites

LDPE HP2023JNLDPE Film

Trading Port：Hangpu / Ningbo / Shanghai / Qingdao Lead Time：30

Reference FOB Price / Purchase Qty

US$ 500

/ kg

1 kg (Min.Order)

Payment Terms:

L/C,T/T

Stock 7000.00

Quantity

Get Lowest Price

Buy Now

Add to Cart

Samples:

US$ 1.00 /1kg(Min.Order) Request Sample

Contact Supplier

TDD-global

info@toodudu.com

Supplier Information

Beijing TDD E-commerce Co., Ltd

Online Store

Titanium dioxide, pigments, fillers, alcohols

Basic Info.

Description

HP2023JN is a Low Density Polyethylene grade suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. HP2023JN contains slip and antiblock additives.

TYPICAL APPLICATIONS

Thin shrink film, lamination film, produce bags, textile packaging, soft goods packaging, general-purpose bags with good optics and t-shirts carrier bags.

Properties

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate
at 190°C and 2.16 kg	2	g/10 min	ASTM D1238
Density
at 23°C	923	kg/m³	ASTM D1505
FORMULATION
Slip agent		-	-
Anti block agent		-	-
MECHANICAL PROPERTIES
Dart Impact Strength	2	g/µm	ASTM D1709
OPTICAL PROPERTIES
Haze (1)	8	%	ASTM D1003
Gloss
at 45°	61	-	ASTM D2457
FILM PROPERTIES
Tensile Properties
stress at break, MD	20	MPa	ASTM D882
stress at break, TD	15	MPa	ASTM D882
strain at break, MD	300	%	ASTM D882
strain at break, TD	588	%	ASTM D882
stress at yield, MD	12	MPa	ASTM D882
stress at yield, TD	12	MPa	ASTM D882
1% secant modulus, MD	235	MPa	ASTM D882
1% secant modulus, TD	271	MPa	ASTM D882

PROCESSING CONDITIONS

Typical processing conditions for HP2023JN are:

Barrel temperature: 160 - 190°C

Blow up ratio: 2.0 - 3.0

HEALTH, SAFETY AND FOOD CONTACT REGULATIONS

Detailed information is provided in the relevant Material Safety Datasheet and or Standard Food Declaration, Additional specific information can be requested via your local Sales Office.

DISCLAIMER: This product is not intended for and must not be used in any pharmaceutical/medical applications.

STORAGE AND HANDLING

Polyethylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery