Favorites

Sabic P6006HDPE PE100 Black

Trading Port：Xingang, Qingdao, Shanghai, Ningbo Lead Time：30

Reference FOB Price / Purchase Qty

US$ 500

/ kg

1 kg (Min.Order)

Payment Terms:

L/C,T/T

Stock 7000.00

Quantity

Get Lowest Price

Buy Now

Add to Cart

Samples:

US$ 1.00 /1kg(Min.Order) Request Sample

Contact Supplier

TDD-global

info@toodudu.com

Supplier Information

Beijing TDD E-commerce Co., Ltd

Online Store

Titanium dioxide, pigments, fillers, alcohols

Basic Info.

Description

FDA 21 CFR 177.1520(c) 3.2a. The resin may be used in contact with all types of food as defined in Table 1, 21 CFR 176.170(c) and at use conditions B-H as defined in Table 2, 21 CFR 176.170(c).

Applications

This bimodal high molecular weight, high density polyethylene (HMW-HDPE) ethylene-hexene copolymer is tailored for blown film applications that require:

• Good bubble stability and film drawdown
• High impact strength and toughness
• Excellent stiffness and tensile strength
• Balanced tear strength

Typical blown film applications include:

• T-shirt bags
• Produce bags
• Merchandise bags
• Industrial liners
• Trash can liners

Note: the above data are only typical analysis values, not product specifications, customer should confirm the suitability and results through their own testing.

MATTERS NEED ATTENTION：

Products should be stored in a well-ventilated, dry, clean warehouse with good fire protection facilities.When storing, it should be kept away from heat source and prevent direct sunlight. It is strictly prohibited to pile up in the open air.

Nominal Blown Film Properties at 0.5 mil1	English	SI	Method
Dart	260 g/mil	100 N/mm	ASTM D1709
Elmendorf Tear MD	15 g/mil	6 N/mm	ASTM D1922
Elmendorf Tear TD	450 g/mil	174 N/mm	ASTM D1922
Tensile Strength at Break MD	13,000 psi	90 MPa	ASTM D882
Tensile Strength at Break TD	6,000 psi	41 MPa	ASTM D882
Tensile Elongation at Break MD	260%	260%	ASTM D882
Tensile Elongation at Break TD	570%	570%	ASTM D882
1 % Secant Modulus MD	120,000 psi	827 MPa	ASTM D882
1 % Secant Modulus TD	140,000 psi	965 MPa	ASTM D882

0.5 mil (12.7 micron) film produced using a grooved-feed extruder at a rate of 225 lb/h with a stalk height of 7 x Die Diameter, a 4:1 Blow-Up Ratio (BUR), a 6 inch die diameter and a 0.040 inch die gap. The nominal properties reported herein are representative of the product under these processing conditions, although film properties can vary depending on the specific film-blowing conditions. Therefore, the data should not be used for specification purposes.

Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and suitability of the product for the specific use in question and is further advised against relying on the information containedherein as it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product is suited and the information is applicable to the user's specific application. Chevron Phillips Chemical Company LP does not make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose,regardless of whether oral or written, express or implied, or allegedly arising from any usage of any trade or from any course of dealing in connection with the use of the information contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract, tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, information contained herein is given without reference to any intellectual property issues, as well as federal, state or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.